•
A single line telephone (SLT) user can hold either one intercom call or one outside (CO)
line call at a time, while a PT user can hold one intercom call and multiple outside (CO)
line calls. To hold multiple intercom calls, use the Call Park feature.
•
You may have to enter the Call Hold feature number after pressing the Recall/hookswitch
on your SLT, depending on the SLT Hold Mode of your PBX. Ask your manager or dealer
about the mode assigned to your PBX.
Customizing Your Phone
•
3.1.3 Customizing the Buttons
Create or edit a Direct Station Selection (DSS) button.
Holding in a System Parking Zone (Call Park)
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the
parked call. Up to 10 calls can be parked in the PBX.
To park a call
PT/SLT
During a conversation
OR
C.Tone &
D.Tone
Press HOLD or
Recall/hookswitch.
To retrieve (Call Park Retrieve)
PT/SLT
Off-hook.
•
If you hear a busy tone when parking a call, the parking zone is unavailable. Dial
another parking zone number directly.
•
If you hear a reorder tone when retrieving a parked call, there is no held call in that
location. Confirm the stored parking zone number.
•
After you park a call, you can perform other operations.
2
2
Enter 22.
stored parking
5
2
zone no.
Enter 52.
Dial stored parking
zone number (0 – 9) .
parking zone no.
C.Tone
Dial parking
zone number (0–9).
C.Tone
Talk.
1.4 During a Conversation
On-hook.
User Manual
51