Hach Orbisphere 3100 Basic User Manual page 19

4. Import solubility parameters
Option Description
Import This option allows you to import solubility parameters from a USB mass storage device.
solubility The tables are recognized by having an extension of .sol. If more than one file is found on
parameters the device, you will need to select the file you want from the list.
Press the down arrow key to highlight the Import File option and press the Enter key to
start the process. You will need to restart the instrument before the new table takes effect.
5. Import instrument basic settings
Option
Import
instrument
basic settings
Exported files
The following files will be automatically exported from the instrument to the USB mass storage device
under a top-level directory of 3100:
• All measurement configuration tables (*.cdm)
• All user tables (*.ndu)
• All solubility tables (*.sol)
• All user settings tables (*.ius)
• Instrument configuration details (InstrumentConf.txt)
• Measurement details (Measurements.txt)
• Instrument model details (Model.txt)
• A number of internal files (*.dat)
The following files can be found under sub-directories CalibrationReports and Screenshots:
• Calibration reports (O2CalibrationReport*.txt)
• Screenshots (View*.bmp)
The text files (*.txt extension) are in a readable format for your PC. Most document editors can be
used to open these files, as well as spreadsheet and other reporting tools.
The measurement configuration tables and user tables can be modified using the PC software (see
PC software installation
Service instrument
1. Board information
Option
Board information This option is useful for troubleshooting purposes and displays information about the
2. Temperature checking
Option
Temperature checking This option is useful for troubleshooting purposes and displays the temperature
Description
This option allows you to import instrument user settings from a USB mass storage
device. The tables are recognized by having an extension of .ius. If more than one file is
found on the device, you will need to select the file you want from the list.
Press the down arrow key to highlight the Import File option and press the Enter key to
start the process. You will need to restart the instrument before the new table takes effect.
on page 10).
Description
mother board, measurement board and battery
Description
readings of the measurement board, pigtail, battery pack and sample
English 19