Table of Contents
Advertisement
Message text / quick dial /
external button programming
At each SIC/ICI 3000, up to
23 message texts comprising
16 characters each can be
entered individually for all types
of message (alarms, emergency
calls, text messages).
Accessing the programming
interface
Message text programming is
activated by pressing the buttons
"F" and "3".
The quick dial menu only appears
when an MFM is connected.
Without an MFM, the message
test programming and external
button assignment are automati-
cally superimposed.
If both menus are active, it is pos-
sible to change from one to the
other with the R button.
Using the door release button,
the selected menu is activated
and you then branch into the
programming level.
Remark
The externally connectable floa-
ting button and the quick dial
buttons are programmed in the
same way.
For instructions on quick dial but-
ton programming, please see the
operating instructions provided
with the SIC/ICI 3000-01.
26
Alarms and emergency calls for
which no text has been entered
are displayed showing the mes-
sage type and channel number,
provided the respective call sta-
tion has been programmed for
receive entitlement.
F
3
Message text
P = Programming
Quick dial
P = Programming
Message text
P = Programming
R
Remark
It is possible to leave the message
text programming mode at any
time using the C button.
In this case, the current input is
interrupted without being stored.
Press "F" and "3"
Display
or
Display
or
Display
Press the R button
Press door release button
Advertisement
Table of Contents
