Programming The Clear Card - Assa Abloy ANYKEY Operation Instructions Manual

2 . 5 Programming the Clear Card

The next card that you program after the installation of the fitting automatically becomes the Clear Card.
Notice
You can program any card to be the Clear Card. However we recommend that you use the delivered card
that has Clear Card printed on it.
Notice
If you hear five short bleeps or if a different sequence of flashing lights is displayed, then the programming
has failed. The old Clear Card continues to be valid. Read through the described sequence once more and
then reprogram the Clear Card.
The new Clear Card is now active.
Use the deletion steps for the Clear Card.
D00422
02
Start the programming.
Whilst the indicators are flashing, hold the card in front of the card
reader.
Recognised and saved.
Programming of the Clear Card has been completed successfully.
Programming instructions
Seite 39