Assa Abloy ACCENTRA 7210 Installation Instructions Manual

7210
Surface Vertical Rod Exit Device
Installation Instructions
Blade Stop Block
Strike Plate
(2) 1/4-20 x 3/4" PFHMS
Top Mounting
Plate
Top Rod
Rod Guide
(2) 8x1/2" PRH"AB"SMS
Roll Pin
Top Rod Connector
Device Assembly
Bottom Rod Connector
Roll Pin
Rod Guide
(2) 8x1/2" PRH"AB"SMS
Bottom Mounting
Plate
(2) 1/4-20 x 3/4" PFHMS
790 Strike
WARNING
This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65warnings.ca.gov.
WARNING
Attention Installer: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the
opening, and ASSA ABLOY makes no representations or warranties concerning what such impact may be in any specific
situation. When retrofitting any portion of an existing fire-rated opening, or specifying and installing a new fire-rated opening,
please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all
applicable codes and ratings.
1-855-557-5078 Ext. 2 • www.accentra-assaabloy.com
Copyright © 2019, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved. Reproduction
in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Shim
(2 Supplied)
Device is packed ready for any
ASSA ABLOY ACCENTRA
narrow stile trim.
791 Strike
(3) 10-24 x 1-1/4" PFHMS
Top Latch
(3) 1-24 x 1/4" PRHMS
(2) 8-32 x 1/4" PFHMS
Latch Cover
(2) 6 x 3/8"
PFH"AB"SMS
Guide Cover
Cover
(2) 1/4-20 x
3/4" PRHMS
(Special
Head)
Bottom Rod
(2) 8-32 x 516" PFHUMS
(2) 6 x 3/8" PFH"AB"SMS
Guide Cover
Deadbolt
Bottom Bolt Case
(3) 10-24 x 1/4" PRHMS
(2) 8-32 x 1/4" PFHMS
Latch Cover
Outside Trim
Feature to hold bolts retracted and touchpad
To Dog Device
1. Insert dogging key.
2. Hold touchbar depressed.
3. Turn key 1/4 turn clockwise.
(Not a feature of fire labeled devices.)
End Clamp
(2) 1/4-20 x 1" PPHMS
Hole Plug
(Fire Devices)
ABBREVIATION FASTENER DESCRIPTION
PFHUMS
PRH"AB"SMS
PFH"AB"SMS
Dogging
depressed, for push-pull door operation.
(3) 8-32 x 5/16" PFHUMS
End Clamp
Dogging Key
PHILLIPS ROUND HEAD
PRHMS
MACHINE SCREW
PHILLIPS FLAT HEAD UNDER
CUT MACHINE SCREW
PHILLIPS FLAT HEAD
PFHMS
MACHINE SCREW
PHILLIPS ROUND HEAD TYPE
"AB" SHEET METAL SCREW
PHILLIPS PAN HEAD
PPHMS
MACHINE SCREW
PHILLIPS FLAT HEAD TYPE
"AB" SHEET METAL SCREW
All dimensions are in inches (mm)
unless otherwise noted.
80-9472-0010-000 04/24