INStaLLatIoN .......................................9 General ................................................. 9 HErMEtIc INStaLLatIoN ................................11 combustion air ............................................11 Fumes eXHaust sYstem ........................................11 ELLa fEaturES ....................................12 MIEtta fEaturES ..................................... 13 WENdy fEaturES ..................................... 14 StovE poSItIoNING ..................................15 NotES for corrEct opEratIoN ..............................15 Fuse ................................................15 pELLEtS aNd fEEdING ..................................
Page 4
ATTENZIONE TASSATIVO PrImA dI mOVImENTArE lA STufA TOglIErE lE mAIOlIchE INdIcATE PEr EVITArE dANNI. ATTENTION - cOmPulSOrY BEfOrE mOVINg ThE STOVE, kINdlY TAkE ThE cErAmIcS Off IN OrdEr TO AVOId ANY dAmAgES ATTENTION - OBlIgATOIrE AVANT dE BOugEr lE POêlE , fAIrE ATTENTION à lEVEr lES cérAmIquES INdIquéES POur éVITEr dES dégâTS VOrSIchT - OBlIgATOrISch BEVOr SIE dEN OfEN BEwEgEN , BITTE uNBEdINgT dIE BEZEIchNETE kErAmIk kA-...
Page 5
ATTENZIONE TASSATIVO PrImA dI mOVImENTArE lA STufA TOglIErE lE mAIOlIchE INdIcATE PEr EVITArE dANNI. ATTENTION - cOmPulSOrY BEfOrE mOVINg ThE STOVE, kINdlY TAkE ThE cErAmIcS Off IN OrdEr TO AVOId ANY dAmAgES ATTENTION - OBlIgATOIrE AVANT dE BOugEr lE POêlE , fAIrE ATTENTION à lEVEr lES cérAmIquES INdIquéES POur éVITEr dES dégâTS VOrSIchT - OBlIgATOrISch BEVOr SIE dEN OfEN BEwEgEN , BITTE uNBEdINgT dIE BEZEIchNETE kErAmIk kA-...
We thank you for having chosen our company; our product is a great heating solution developed from the most advanced technology with top quality machining and modern design, aimed at making you enjoy the fantastic sensation that the heat of a flame gives, in complete safety. Warnings This instructions manual is an integral part of the product: make sure that it always accompanies the appliance, even if transferred to another owner or user, or if transferred to another place.
DO NOT LEAVE THE PACKAGING ELEMENTS WITHIN REACH OF CHILDREN OR UNASSISTED DISABLED PERSONS. THE HEARTH DOOR MUST ALWAYS BE CLOSED DURING NORMAL FUNCTIONING OF THE PRODUCT. WHEN THE APPLIANCE IS FUNCTIONING AND HOT TO THE TOUCH, ESPECIALLY ALL EXTERNAL SURFACES, ATTENTION MUST BE PAID ...
InstallatIon general The flue gas exhaust and hydraulic connections must be carried out by qualified personnel who must issue installation conformity documentation compliant with national standards. the installer must provide the owner or person acting for him, according to the legislation in force, with the declaration of conformity, supplied with: 1) the use and maintenance manual of the appliance and of the system components (such as for example, the smoke ducts, chimney, etc.);...
Page 10
In the presence of type B gas appliances with intermittent operation not intended for heating, they must have their own aeration and/or ventilation opening. The air inlets must meet the following requirements: they must be protected with grids, metal mesh, etc., but without reducing the net useful section; ...
Hermetic installation Ella/ Mietta/ Wendy is a completely sealed product with respect to the installation environment, which makes it ideal for passive houses, as it does not take air from inside the homes. combustion air To respect the air-tight seal of the stove, the combustion air connection pipe must be directly connected to the outside using specific sealed fittings and pipes.
EllA FEAturEs Room air outlet Radio/emergency card Additional thermostat input Combustive air Pellet hopper pressurised closure On/Off input Combustion chamber access fuse fume output Access to the ash drawer Power supply 220v ENGLISH...
stovE posItIonInG for the correct operation of the product, it is recommended to position it in a way that it is perfectly level, with the aid of a spirit level. notEs For CorrECt opErAtIon Pellet hopper lid for the correct operation of the pellet stove, the following indications must be respected: During the operation of the stove, the pellet hopper lid and the door must always be closed.
Pellets and feeding Pellets are made by subjecting wood shavings i.e. the rejects of pure wood (without paint) sawmill, carpenter products and products from other activities connected to working and transforming wood, to very high pressures. This type of fuel is fully ecological as no glues are used to hold it together. In fact, the compactness of the pellets is guaranteed over time by a natural substance that is found in wood: wood coal.
Radio/emeRgency caRd The stove is fitted with an emergency radio card located in the side, allowing the basic operation of the stove in the event that the handheld device is damaged or malfunctions. Not in use The functions that can be managed from the emergency card are: Powered Decrease power LED off stove off.
handheld cOnFIGUratIOn HAndHeld codIng procedure: 1. disconnect the power supply to the stove. 2. press keys at the same time until the unIT selection screen appears. 3. using keys select the new unIT. 4. power the stove. confirm the selected unit within 10 seconds (all leds flash on the radio/emergency card) by pressing the oK key on the handheld.
handheld FeatUreS The handheld is fitted with an lcd backlit display. The display remains lit for 5 seconds. After a certain period of time, in order to minimise battery consumption, the display turns off (sleep mode). It turns on again after pressing the on/oFF key (6). caUtIOn! do not place the handheld in direct or indirect contact with water.
dISplay sCreen in OPeraTiOn STAnd-BY active chrono active Battery low power 1-5^ Time Temperature detected in room Set ambient temperature display text sCreen wiTh eXTernal TherMOsTaT COnneCTed TO The TerMinal “Ta” Time Indicates contact of external supplementary thermostat display text ENGLISH...
General menU FUnCTiOn FUnCTiOn Scroll parameters Back - exit key Modify settings on - off key Access menu key power AMBIenT TeMp. VenTIlATIon eASY SeTup SeT cHrono enABle cHrono SeT prg 1 SeT prg 2 SeT prg 3 SeTTIngS dATe/TIMe SeT prg 4 lAnguAge dISplAY...
cOmmISSIOnInG SettInGS once the power cable at the back of the generator has been connected, move the switch, also located on the back, to (I). The switch at the back of the generator powers the generator board. The generator remains off and a first screen appears on the panel reading oFF. lIne FreqUency 50/ 60hz If the generator is installed in a country with a frequency of 60Hz, the generator will display "incorrect line frequency".
OperatIOn and lOGIc IGnItIOn once the previously listed points have been checked, press key for three seconds to ignite the stove. 15 minutes are available for the ignition phase. After ignition and after reaching the control temperature, the stove interrupts the ignition phase and switches to prepArATIon. preparatIOn during the preparation phase, the stove stabilises combustion, increasing it progressively, to then start ventilation and switch to worK.
pOwer The menu allows the generator power to be set Minimum power 1, maximum power 5. To set: OK > Set > POwer. rOOm temperatUre The menu allows to set the room temperature to reach. (front ventilation must be active). range: low-TA - 07 - 40 - HoT To set: OK >...
Set chrOnO This function allows the generator's ignition and switch-off to be automatically programmed. By factory default, the SeT cHrono is disabled. The chrono allows the programming of 4 time slots within a day, which can be used every day of the week. Ignition and switch-off times can be set for each time slot, along with the specific days of application for the programmed time slot and the desired temperature.
SettInGS date/tIme lanGUaGe See cHApTer: coMMISSIonIng SeTTIngS. Set deGreeS dISplay The "dISplAY" menu allows: Set the timer to turn off the display regulation of display contrast backlight. Activation/deactivation of backlight. Set the timer to turn off the display (sleep ...
FIrSt lOad This function allows to fill the auger, facilitating the phases of the first start-up of the stove, or in the event that the pellet tank is empty. with the stove cold and "oFF", make sure the pellet has been introduced inside the tank and activate the FirSt LOaD function, confirming with oK.
TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR GO TO THE WEBSITE: WWW.LANORDICA-EXTRAFLAME.COM Cleaning and maintenanCe Follow the instruCtions always in Complete saFety! Make sure that the power cord is unplugged because the generator may have been programmed to turn on.
every 7 days burning pot and Combustion Chamber: The burn pot is cleaned via a mechanical system at pre-fixed intervals automatically by the boiler. It is recommended to remove any residues using a suction device. Suck up the ash deposited between separator and fire door.
HOLES TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR GO TO THE WEBSITE: WWW.LANORDICA-EXTRAFLAME.COM routine maintenanCe perFormed by QualiFied teChniCians routine maintenance must be performed at least once a year. Using pellets as a solid fuel, the generator requires routine maintenance once a year, which must be performed by a qualified technician, using only original spare parts.
Page 31
TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR GO TO THE WEBSITE: WWW.LANORDICA-EXTRAFLAME.COM IMAGES ARE FOR ILLUSTRATIVE PURPOSES. Fumes motor (disassembly and cleaning and fumes pipe and "T"), new silicone in the provided points Gaskets, pellet tank, inspections, ash drawer and door (replace and apply silicone where required) Combustion chamber and heat exchanger (full cleaning) including ignition-plug pipe Feed box (complete emptying and cleaning).
* on models with this function. TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR GO TO THE WEBSITE WWW.LANORDICA-EXTRAFLAME.COM ENGLISH...
Make sure that the pellet tank, door and ash drawer close properly. Door open. Tank - DooR Check air inlet. Air inlet clogged or dirty. * on models with this function. TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR GO TO THE WEBSITE WWW.LANORDICA-EXTRAFLAME.COM ENGLISH...
Extraflame S.p.A. cannot be held liable for injury or damage which may - either directly or indirectly - be caused to persons, animals and property ensuing from failure to observe all the instructions provided in the relevant instruction manual and the warnings regarding installation, use and maintenance of the product, that can also be downloaded on the website.
Page 35
AddITIONAL wARNINGs Only use the fuel recommended by the manufacturer. The product must not be used as an incinerator. Do not use the product as a ladder or supporting structure. Do not place laundry on the product to dry it. Any clothes-horse or similar objects must be kept at due distance from the product. Danger of fire or damage to the coating.
Page 36
Extraflame S.p.A. Via Dell’Artigianato, 12 36030 - MONTECCHIO PRECALCINO (VI) - ITALY +39.0445.865911 - +39.0445.865912 - info@extraflame.it - www.lanordica-extraflame.com MADE ITALY design & production TO FIND THE SERVICE CENTRE NEAREST TO YOU CONTACT YOUR DEALER OR CONSULT THE SITE WWW.LANORDICA-EXTRAFLAME.COM...
Need help?
Do you have a question about the ELLA and is the answer not in the manual?
Questions and answers