Table of Contents
Advertisement
S800VE
Note
Slider operations cannot be performed unless you start the Viewer PTZ or Digital PTZ.
Sliders Used for Digital Zoom
If you set [Camera] > [Camera] > [Camera Control] > [Digital Zoom] to [Enable] on the Setting Page (P. 100), the
digital zoom range (orange) will be displayed on the zoom slider and you will be able to use digital zoom.
Note
• The zoom ratio (digital zoom ratio) is displayed in the information display.
• With digital zoom, image quality is reduced as the zoom ratio increases.
Using Area Zoom/Drag to Move
You can drag on the video display area to zoom in and out, and change the camera angle.
Note
You cannot use Area Zoom or Drag to Move when using Viewer PTZ or Digital PTZ.
Using Area Zoom to Zoom In and Out
Click the [Switch Area Zoom/Drag to Move] button to enter
1
2
Drag out a frame in the video display area.
Drag left-to-right to define an area to zoom in on.
Drag right-to-left to draw out a frame in which will appear a preview of the video display area that will be zoomed
out to.
S30VE S910F
Digital Zoom Range
Optical Zoom Range
(Area Zoom) mode.
3
S30VE
61
Advertisement
Table of Contents
Troubleshooting
