Canon VB-S800VE Operation Manual page 151

[Current Volume Level]
The current volume level is displayed on the status bar.
The level set in [Reference Volume Level] is indicated by a red mark. Volume below the reference level is displayed in blue,
that above the reference level is displayed in red.
[Detect Criteria Duration (sec)]
When the status meeting the volume detection criteria has continued for the specified duration or longer, an ON event is
triggered.
[ON Event Operation]
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when a
volume detection event is triggered (ON event).
[OFF Event Operation]
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when a
volume detection event is completed (OFF event).
[Ongoing ON Event Operation]
Select the operation to be performed during an ON event. This can be set when [ON Event Operation] is set to [Enable].
If [Enable] is selected, [Video Record] and [E-mail Notification] will be executed according to their settings during the
volume detection event.
S30VE S910F
[Preset]
If you specify a preset, the camera angle will automatically move to the preset location when a volume detection event is
triggered.
It is necessary to set presets beforehand with [Camera] > [Preset] (P. 118).
S30VE S910F
Important
When the camera is triggered by a volume detection event and moved to a preset position specified in the [Preset] settings, camera
control privileges are released, even if the user has obtained those camera control privileges using the Camera Viewer or other camera
control applications.
[Video Record]
Select whether to record video depending on the volume detection event.
If you select [Enable] and a volume detection event is triggered, video will be transmitted to the recording destination
specified in [Video Record] > [Upload] > [Video Record Action] (P. 141).
[E-mail Notification]
Select whether to send an e-mail notification depending on the volume detection event.
If you select [Enable] and a volume detection event is triggered, an e-mail notification will be sent.
To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 145) beforehand.
[External Device Output for ON Event]
Select the operation of the external device output when an ON event is triggered.
[External Device Output for OFF Event]
Select the operation of the external device output when an OFF event is triggered.
4
151