Settings; Change Password - Oki c332 User Manual

ITEM
JOB CANCEL CANCEL KEY
SETUP BEHAVIOR
INQUIRY DISPLAY
FOCUS POSITION
DISPLAY TIMEOUT
NEARLIFE DRUM NEARLIFE
SETUP
FUSER NEARLIFE
BELT NEARLIFE
S
ETTINGS
ITEM
MENU RESET
SAVE MENU
RESTORE MENU
C P
HANGE ASSWORD
ITEM
NEW PASSWORD
VERIFY PASSWORD

SETTINGS

EXPLANATION
SHORT Specify the behavior when Cancel button is
pressed in printing.
LONG
OFF
ON Specify whether the Job Cancel selection request
will be displayed.
OFF
ON: Display when Job Cancelling.
OFF: Do not displasy.
YES Specify the default selection of Job Cancel
request.
NO
60 Specify the timeout of Job Cancel selection
request. When the time passed, the printing will
~
be continued as Job Cancel = No.
180
~
300
500~5000
500~5000
500~5000
SETTINGS EXPLANATION
EXECUTE Resets menus to default settings.
EXECUTE Saves the current menu settings. The last menu
executed is saved and the menu previously saved
is overwritten and erased.
When you press the OK button, the following
confirmation message is displayed.
ARE YOU SURE? YES/NO
If you select NO, the display returns to the
previous menu.
If you select YES, the current menu settings are
stored and the menu is exited.
EXECUTE Changes to the menu setting saved.
When you press the OK button, the following
confirmation message is displayed.
ARE YOU SURE? YES/NO
If NO is selected, the previous menu display
resumes.
If YES is selected, changes made to the menu
setting are saved and you exit from the menu.
Notes:
This cannot be executed when data is printing.
This menu item will only show if the menu has
been saved previously
SETTINGS EXPLANATION
************ Set a new password for entering the
administrator's menu.
Password should be from 6 to 12 digits of alpha/
numeric characters (or mix).
The default value is "999999".
The printer will restart after the ADMIN MENU.
************ Verification of above.
Operator panel > 47