Energy Saving Settings; Power Saving Mode; Sleep Mode; Returning To Standby Mode - Oki c332 User Manual

E
NERGY SAVING SETTINGS
P
OWER SAVING MODE
If you do not use the machine for a while, it will enter the power saving mode to control
the power consumption of the device. To cancel or initiate power saving mode, press the
Power Save button on the control panel. The Power Save button illuminates while in
Power Save Mode.
NOTE
By default, the time interval to enter power saving mode is set to 1 minute.
You can change the time interval by pressing the Menu buttons on the control
panel. Then select MENUS > SYSTEM ADJUST > POW SAVE TIME.
S
LEEP MODE
Your machine transitions from power saving mode to sleep mode after a set period of time.
In sleep mode the power consumption of the device is minimal. The Power Save button
blinks while in sleep mode.
NOTE
> The machine will not enter sleep mode if an error occurs and the machine
requires attention.
> By default, the time interval to enter sleep mode is set to 15 minutes. You
can change the time interval by pressing the Menu buttons on the control
panel. Then select MENUS > SYSTEM ADJUST > SLEEP TIME.
> It will automatically switch from Sleep Mode to Power Save Mode. In a
network environment with a large number of packets flows, your
computer may respond by automatically switching from Sleep mode to
Power Save Mode. After a period of time has elapsed, the computer will
automatically enter into Sleep Mode.
R
ETURNING TO STANDBY MODE
To return the machine to standby mode from power save or sleep mode, press the Power
Save button on the control panel.
NOTE
When your machine receives a print job, it automatically returns to standby
mode.
Getting Started > 11