Oki c332 User Manual page 29

ITEM
STSTEM SLEEP TIME
ADJUST
(cont.)
AUT PW OFF TOME
SILENT MODE
ECO MODE
CLRABLE WARINING
AUTO CONTINUE
MANUAL TIMEOUT
SETTINGS EXPLANATION
1 MIN Adjusts the power saving time before the
printer automatically switches into sleep mode.
2 MIN
3 MIN
4 MIN
5 MIN
10 MIN
15 MIN
30 MIN
60 MIN
1 HOURS Sets the time to switch from idle state to Off
mode.
2 HOURS
3 HOURS
4 HOURS
8 HOURS
12 HOURS
18 HOURS
24 HOURS
ON Specifies a print preparation operation when
entering standby status from Sleep mode.
OFF
ON : It is quiet as there is no print preparation.
OFF : There is a rotation noise of the image to
perform print preparation but you can start
first printing early.
ON ON : Printing starts even before the
temperature of the fuser reaches the
OFF
prescribed degrees, if the job is small.
OFF : Printing starts after the temperature of
the fuser reaches the prescribed degrees.
ONLINE When ONLINE, non-critical warnings, such as
requests for a different paper size, can be
JOB
cleared by pressing the ON LINE button. When
set to JOB, they are cleared when the print job
resumes.
ON Determines whether or not the printer will
automatically recover from a memory overflow
OFF
condition.
OFF Specifies how many seconds the printer will
wait for paper to be fed before cancelling the
30 SEC
job.
60 SEC
Operator panel > 29