Oki c332 User Manual page 31

ITEM
PRINT POSITION
ADJUST ADJUST
SETTINGS
MP X +2.00MILLIMETER
TRAY ADJUST
~
0.00MILLIMETER
~
-2.00MILLIMETER
Y +2.00MILLIMETER
ADJUST
~
0.00MILLIMETER
~
-2.00MILLIMETER
DUPLEX +2.00MILLIMETER
X
~
ADJUST
0.00MILLIMETER
~
-2.00MILLIMETER
DUPLEX +2.00MILLIMETER
Y
~
ADJUST
0.00MILLIMETER
~
-2.00MILLIMETER
TRAY1 X +2.00MILLIMETER
ADJUST
~
0.00MILLIMETER
~
-2.00MILLIMETER
Y +2.00MILLIMETER
ADJUST
~
0.00MILLIMETER
~
-2.00MILLIMETER
DUPLEX +2.00MILLIMETER
X
~
ADJUST
0.00MILLIMETER
~
-2.00MILLIMETER
DUPLEX +2.00MILLIMETER
Y
~
ADJUST
0.00MILLIMETER
~
-2.00MILLIMETER
Operator panel > 31
EXPLANATION
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.