Oki c332 User Manual page 32

ITEM
PRINT POSITION
ADJUST ADJUST
(cont.) (cont.)
PAPER BLACK SET
PAPERT COLOR SET
SMR SETTING
BG SETTING
SETTINGS
TRAY2 X +2.00MILLIMETER
ADJUST
~
0.00MILLIMETER
~
-2.00MILLIMETER
Y +2.00MILLIMETER
ADJUST
~
0.00MILLIMETER
~
-2.00MILLIMETER
DUPLEX +2.00MILLIMETER
X
~
ADJUST
0.00MILLIMETER
~
-2.00MILLIMETER
DUPLEX +2.00MILLIMETER
Y
~
ADJUST
0.00MILLIMETER
~
-2.00MILLIMETER
+2
+1
0
-1
-2
+2
+1
0
-1
-2
+3
+2
+1
0
-1
-2
-3
+3
+2
+1
0
-1
-2
-3
Operator panel > 32
EXPLANATION
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Used for small adjustments when you
experience faded print or light specks /
streaking in monochrome printing on white
paper.
Select a higher value to reduce fading, or a
lower value to reduce specks or streaking in
high density print areas.
As above, but for color printing.
Sets a correction value for uneven print
quality, to correct print variations caused by
variations in temperature and humidity or in
print density/frequency.
Sets a correction value for dark-colored paper
printing, to correct print variations caused by
variations in temperature and humidity or in
print density/frequency.