Ps Setup - Oki c332 User Manual

ITEM
COLOR CYAN DENSITY
DENSITY
MAGENTA DENSITY
YELLOW DENSITY
BLACK DENSITY
ADJUST REGSTRATION
INK SIMULATION
UCR
CMY100% DENSITY
CMYK CONVERSION
PS S
ETUP
ITEM
L1 TRAY
NET PS-PROTOCOL
USB PS-PROTOCOL
PDF PAPER SIZE
PDF SCALING SIZE
SETTINGS EXPLANATION
-3~0~+3 Adjusts the density of each color
(cyan,magenta, yellow and black).
-3~0~+3
Normal setting is 0.
-3~0~+3
-3~0~+3
EXECUTE Performs automatic color registration
adjustment.
Normally this is done on power on and when
output tray is opened and then closed.
This process accurately aligns the cyan, magenta
and yellow images to the black image.
OFF Selects from a range of industry standard color
swatches.
SWOP
Note: This function only applies to PS models
EUROSCALE
JAPAN
LOW Selects limitation of the toner layer thickness.
MEDIUM If paper curl occurs in dark printing, selecting
MEDIUM or LIGHT sometimes helps reduce curl.
HIGH
ENABLE When enabled, black areas are produced using
100% C, M, and Y instead of black.
DISABLE
This results in a glossier finish.
ON Setting to "OFF" will simplify the conversion
process of CMYK data, which will reduce the
OFF
processing time.
This setting is ignored when Ink Simulation
function is used.
Note: This function only applies to PS models
SETTINGS EXPLANATION
TYPE1 [TYPE1]: The tray selection number for the level
1 operator begins with 1.
TYPE2
[TYPE2]: The number begins with 0.
ASCII Specifies a communication protocol mode for PS
data from a network.
RAW
ASCII Specifies a communication protocol mode for PS
data from USB.
RAW
CURRENT Select the paper size of PDF Direct Print.
TRAY SIZE
SIZE IN PDF
FILE
SCALING SIZE
1% Specifies scaling size by percent when PDF Paper
Size is set to Scaling Size.
~
99%
Operator panel > 40