Volume Control; Using The Dolphin Terminal As A Phone; Using The Phone App To Initiate A Call; Phone - Honeywell dolphin 70e black User Manual

• Headset Mode
When a headset is plugged into the Audio Jack, the terminal defaults
to the headset for receiving calls and audio input.
• Hands-Free Mode
The bottom speakers are used as a speaker phone. To switch to speaker phone during a call,
touch on the phone icon in the tile bar at the bottom of the screen, and then select Speaker On.
Important - Do not cover the side microphone with your hand when using the terminal for phone calls.
Both the front and side microphones must be free from obstruction for the noise cancellation feature to
function properly during a handset mode call.

Volume Control

Press the up or down arrow on the Volume Control button on the left side of the device to adjust the
volume of the active speaker, see

Using the Dolphin Terminal as a Phone

If your Dolphin model is equipped for voice + data WWAN connectivity, you can use the terminal as a
phone over the cellular networks.
You can initiate a phone call from the Phone app

Using the Phone App to Initiate a Call

Touch the Phone app icon

Phone

, Call Log
To switch between the tabs, swipe left or right on the screen or select the relevant icon.
Note: With the Phone App open, press the Menu button
options (e.g., Voicemail, Call Forwarding, Fixed Dialing Numbers and Internet Call Settings).
Phone
1. Open the Phone app
Volume Control Button
on the Home screen. The Phone app is organized into three tabs:
, and Contacts
. You can initiate a call from any of the three tabs.
and select the Phone icon
on page 3-10.
, the People app
, and select Settings to manage advanced phone
if the dialer keypad is not visible.
or the Voice Dialer app .
8 - 3