Replacing The Battery In Terminals Not Equipped With A Battery Door Lock - Honeywell dolphin 70e black User Manual

Replacing the Battery in Terminals Not Equipped with a Battery Door Lock

The following instructions are relevant for Dolphin 70e Black terminals equipped with battery retention
strap. If your Dolphin 70e Black terminal does not have a retention strap, but it does have battery door
lock, refer to the instructions on page 2-15.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
Note: The following illustrations depict a standard battery with a standard battery door; however, battery removal/
installation procedures are the same for the extended battery and extended battery door.
1. Press the Power button
2. Remove the battery door and release the battery retention strap.
3. Push the battery door latch back to remove the battery. Do not pull on the battery retention strap
when attempting to remove the battery.
4. Install the new battery. See battery part number specifications on page 3-12.
to place the terminal in Suspend mode.
2 - 17