Honeywell dolphin 70e black User Manual page 50

Left Scan/Image Button
By default, the left button triggers the scanner/imager. You can reassign the button to launch
applications or execute commands; see
Memory Card Socket
The memory card socket provides the user with the option to expand the terminal's memory
capacity using microSD or microSDHC memory interfaces. The expansion socket is located
under the battery door and battery.
Note: Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or
microSDHC memory cards with Dolphin terminals for maximum performance and durability.
Contact a Honeywell sales representative for additional information on qualified memory card
options.
When the battery door and battery pack are properly installed, the card is sealed against
moisture and particle intrusion, read/write data is stored securely, and the terminal's
environmental rating is preserved; see
Card on page
Memory Retention Flap
The memory card retention flap locks the memory card in the socket; see
and/or Replacing the Memory Card
Power Button
The Power button
on the length of time the button is pressed.
• A quick press of the button toggles
Power Key
• Press and hold the button down for approximately 4 seconds to access the Phone menu to
Power Off the terminal, Reboot (Hard Reset) the terminal, enable Airplane Mode, set the
Volume of the active speaker to On, Off, or Vibrate. To modify this feature, see
System Dialog
• Press and hold the button down for approximately 8 seconds to initiate a manual Reboot
(Hard Reset) if the touch screen has stopped responding.
SIM Card Socket
The card socket for the Subscriber Identity Module (SIM) is located under the battery door and
main battery. When the battery door and battery are properly installed, the card is sealed
against moisture and particle intrusion, read/write data is stored securely, and the terminal's
environmental rating is preserved; see
Card on page
SIM Card Retention Flap
The SIM card retention flap locks the SIM card in the socket; see
Replacing the Memory Card
Volume Control Button
Press the top or bottom of the volume button to raise or lower the volume of the active speaker.
Lower the volume all the way down to turn off the volume and enable vibration mode.
3 - 10
3-17.
located on the top of the terminal initiates multiple functions depending
on page 6-2.
on page 6-2.
3-17.
on page
Hotkeys on page
Installing a SIM Card and/or Replacing the Memory
on page 3-17.
Suspend Mode On or Off. To modify this feature, see
Installing a SIM Card and/or Replacing the Memory
3-17.
2-12.
Installing a SIM Card
Installing a SIM Card and/or
Show