How To Initialize The Tire Pressure Warning System - Toyota C-HR 2017 Owner's Manual

634
7-3. Do-it-yourself maintenance

How to initialize the tire pressure warning system

■
1
Park the vehicle in a safe place and turn the engine switch to the
"LOCK" position (vehicles without a smart entry & start system)
or off (vehicles with a smart entry & start system).
Initialization cannot be performed while the vehicle is moving.
2
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (P. 772)
Make sure to adjust the tire pressure to the specified cold tire inflation
pressure level. The tire pressure warning system will operate based on
this pressure level.
3
Turn the engine switch to the "ON" position (vehicles without a
smart entry & start system) or IGNITION ON mode (vehicles with
a smart entry & start system).
Vehicles with monochrome display

4
Press the "DISP" switch until
Press and hold the "DISP" switch to enter the adjustment mode.
5 Press the "DISP" switch until the menu of tire pressure warning
system appears.
Press and hold the "DISP" switch to display the menu.
6
Press and hold the "DISP"
switch while the cursor is on
"SET" to initialize the system.
If initialization is completed,
the tire pressure warning
light will blink 3 times.
C-HR_OM_Europe_OM10528E
appears. (P. 124)