654
7-3. Do-it-yourself maintenance
3
Remove the depleted battery.
When removing the cover, if the
battery cannot be seen due to the
electronic key module attaching to
the upper cover, remove the elec-
tronic key module from the cover
so that the battery is visible as
shown in the illustration.
Use an appropriate sized flathead
screwdriver when removing the
battery.
Insert a new battery with the "+"
terminal facing up.
4
When installing, reverse the steps listed.
■
Use a CR1620 (vehicles without a smart entry & start system) or CR2032
(vehicles with a smart entry & start system) lithium battery
●
Batteries can be purchased at any authorized Toyota retailer or Toyota
authorized repairer, or any reliable repairer, local electrical appliance shops
or camera stores.
●
Replace only with the same or equivalent type recommended by the manu-
facturer.
●
Dispose of used batteries according to local laws.
■
If the key battery is depleted
The following symptoms may occur:
●
The smart entry & start system (if equipped), push button start (if equipped)
and wireless remote control will not function properly.
●
The operational range will be reduced.
C-HR_OM_Europe_OM10528E