Engine Oil Consumption; After Changing The Engine Oil - Toyota C-HR 2017 Owner's Manual

■

Engine oil consumption

A certain amount of engine oil will be consumed while driving. In the following
situations, oil consumption may increase, and engine oil may need to be
refilled in between oil maintenance intervals.
●
When the engine is new, for example directly after purchasing the vehicle or
after replacing the engine
●
If low quality oil or oil of an inappropriate viscosity is used
●
When driving at high engine speeds or with a heavy load, when towing, or
when driving while accelerating or decelerating frequently
●
When leaving the engine idling for a long time, or when driving frequently
through heavy traffic
■

After changing the engine oil

The engine oil maintenance data should be reset. Perform the following pro-
cedures:
Switch the display to the trip meter "A" when the engine is running.
1
(P. 122)
Turn the engine switch off.
2
Vehicles without a smart entry & start system:
3
While pressing the "TRIP" switch (P. 122), turn the engine switch to the
"ON" position (do not start the engine because the reset mode will be can-
celed). Continue to press and hold the switch until the trip meter displays
"00000".
Vehicles with a smart entry & start system:
While pressing the "TRIP" switch (P. 122), turn the engine switch to the
IGNITION ON mode (do not start the engine because the reset mode will
be canceled). Continue to press and hold the switch until the trip meter dis-
plays "00000".
C-HR_OM_Europe_OM10528E
7-3. Do-it-yourself maintenance
621
7