Table of Contents
Advertisement
342
6-3. Do-it-yourself maintenance
■
How to initialize the tire pressure warning system
1
Park the vehicle in a safe place and turn the engine switch off.
Initialization cannot be performed while the vehicle is moving.
2
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (P. 431)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
3
Turn the engine switch to IGNITION ON mode.
4
Press and hold the tire pres-
sure warning reset switch
until the tire pressure warn-
ing light blinks slowly 3 times.
"- -" will be displayed for infla-
tion pressure of each tire on
the multi-information display
while the tire pressure warning
system determines the posi-
tion of each tire.
When position of each tire is
determined, the inflation pres-
sure of each tire will be dis-
played on the multi-information
display.
5
Wait for a few minutes with the engine switch in IGNITION ON
mode and then turn the engine switch off.
AVALON (U)_(01999-07001)
Advertisement
Table of Contents
