Toyota C-HR 2017 Owner's Manual page 717

5 Connect the nozzle to the
valve.
Screw the end of the nozzle clock-
wise as far as possible.
The bottle should hang vertically
without contacting the ground. If
the bottle does not hang vertically,
move the vehicle so that the tire
valve is located properly.
6
Remove the cap from the bot-
tle.
7
Pull the hose out from the com-
pressor.
8
Connect the bottle to the com-
pressor.
Screw the end of the nozzle clock-
wise as far as possible.
C-HR_OM_Europe_OM10528E
8-2. Steps to take in an emergency
717
8