Konica Minolta Bizhub c554e Installation Manual page 2

Outline of installation procedures (C364e/C284e/C224e)
PC-110 PC-210
AU-102
WT-506
AU-201
Electronic system options
DF-701 SP-501
PK-519 FS-533
When installing the machine and associated options as a system, follow the order shown on the upper.
Caution:
• For the detailed installation procedures for each
option, follow the instructions given in the corre-
sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main unit installa-
tion.)
• When placing the machine on the floor, make
sure to use the paper feed cabinet or the desk
to secure the performance and the quality of
the product.
• To use this machine, install the dual scan docu-
ment feeder, the reverse automatic document
feeder, or the original cover.
Even if you do not install the original cover, be
sure to install the hinge covers supplied with
the original cover.
• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.
KP-101
HT-509
MK-734
PC-410 DK-510
Machine MK-730
MK-735
DF-624 OC-511
FS-534
JS-506
KH-102
E-2
✱ Electronic system options
EK-606
UK-204
UK-208
DK-705
SC-508
VI-506
IC-414
FK-511
FK-508
FS-534SD
PK-520
SD-511
• Lifting the machine in an awkward position or
transporting it in a poorly balanced position
could result in personal injury. When transport-
ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces-
sively loaded.
(mass: approx. 85 kg (187-3/8 lb))
*1 *1
EK-607
*1
*1
UK-209
*2
*2
*3 *3
MK-728
*1
: No particular order in
installation procedures.
*2
: Unable to be installed in
C224e.
*3
: Varies depending on the
applicable marketing area
A161IXC001DA