Konica Minolta Bizhub c554e Installation Manual page 24

XXXII. Installing the output tray (OT-506)
(C554e/C454e only)
1. Check whether the output tray has the snap-fit
hook illustrated below or not.
< With the snap-fit hook >
< Without the snap-fit hook >
< If the machine has the snap-fit hook >
Go to step 4.
< If the machine does not have the snap-fit hook >
Go to step 2.
2. Open the upper and lower front door of the
machine.
3. Remove the upper left cover from the machine.
(Three screws)
4. Attach the guide supplied with the output tray to
the machine.
5. Install the output tray.
A5C1IXC026DA
A5C1IXC027DA
6. Reattach the upper left cover removed in step 3
to the machine. (Three screws)
7. Close the upper and lower front door of the
machine.
A2XKIXC021DA
E-24
➀
< With the snap-fit hook >
< Without the snap-fit hook >
➁
A2XKIXC032DA
A5C1IXC028DA
A2XKIXC022DB