ATTO Technology iPBridge 2600 Installation And Operation Manual page 13

7 Data port IP address, subnet mask and
gateway information is listed. Change any
elements as needed.
8 Click Next.
9 Select the answer to the question Does your
network support Jumbo Frames?
10 Click Next.
11 Set your administrator password.
12 Click Next.
13 The configuration for the iPBridge based on
your input in the previous screens appears. If
the information is correct, click Commit.
14 The ExpressWizard configures your iPBridge
and storage. You may select items on the left
side menu to view the current configuration or
to change the configuration.
8