Install Ms Iscsi Initiator For Windows; Install Iscsi Initiator For Os X; Set Up Internet Explorer; Begin Configuration - ATTO Technology iPBridge 2600 Installation And Operation Manual
Hide thumbs
Also See for iPBridge 2600:
- Installation and operation manual (72 pages) ,
- Brochure (14 pages) ,
- Product features (1 page)
Table of Contents
Advertisement
If you use Internet Explorer, use
Explorer
if needed.
Install MS iSCSI Initiator for Windows
1
Download the latest version of Microsoft
Software Initiator from
www.microsoft.com/downloads.
on iSCSI Initiator helps to locate it.
2
Launch the Initiator installation program and
follow the instructions.
3
Find the Microsoft iSCSI Initiator icon on your
desktop and launch the program.
4
Click on the Discovery tab.
5
Click on the Add button under the target portal
heading.
6
Type in the iPBridge IP address recorded in
Discover the IP address
7
Click on OK.
8
Click the Targets tab.
9
Click on Log on button.
10 Select Automatically restore this connection
when the system reboots.
11 Click OK to complete logon.
12 If the Found New Hardware Wizard appears,
follow the instructions and install the driver from
the CD that came with your iPBridge.
13 Click OK to close the iSCSI Initiator utility.
You should now have storage you can manage
through Windows Disk Management.
Continue to
Begin
configuration.
Install iSCSI Initiator for OS X
Contact your ATTO sales representative or go to
to purchase the ATTO
www.attotech.com
Technology Xtend SAN iSCSI Initiator for OS X.
Exhibit 2.0-1 Install the iPBridge into a rack using the brackets provided.
Set up Internet
®
iSCSI
Searching
on page 5.
Set up Internet Explorer
1
Open your browser.
2
Select Internet Options.
3
In the Internet Options screen, select the
Security tab.
4
Click on the Trusted Sites icon.
5
Click on the Sites button.
6
In the text box Add this Web site to the zone,
add the IP address of the iPBridge. You may
use wild cards.
7
Click on Add.
8
Uncheck the Require server verification
check box.
9
Click OK.
10 At the bottom of the Internet Options box, click
on OK and close the box.
Begin configuration
1
Return to the ExpressNAV interface welcome
screen. Click on Enter Here.
2
Type in the user name and password.
Note
The default values are user name root and
password Password. The user name is case
insensitive and the password is case
sensitive.It is best practice to change the
default user name and password. Refer to
Modify passwords
3
The Status page appears. Continue to
Configure the iPBridge
on page 13.
on page 7.
6
Advertisement
Table of Contents
