Alcatel-Lucent 7210 SAS M Configuration Manual page 420

System Administration Commands
file-url — The file URL location to save the binary file.
update-golden-bootstrap
Syntax update-golden-bootstrap [file-url]
Context admin
Description
This command updates the golden bootstrap image with the file-url, after validating it as a bootstrap
image for the 7210 SAS platforms.
Default cf1:/boot.tim
Parameters
file-url — Specifies the file URL.
Page 420
Guide
file url: local-url | remote-url: 255 chars max
local-url:
remote-url:
cflash-id:
usb-flash-id
Values file-url:
7210 SAS M, T, X, R6 Basic System Configuration
[<cflash-id>/ | <usb-flash-id>][file-path], 200 chars max,
including the cflash-id directory length, 99 chars max each
[{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address]
ipv4-address a.b.c.d
255 chars max, directory length 99 chars max each
cf1:, cf2 (only on 7210 SAS-T)
uf1:
local-url: 255 characters max
local-url: [cflash-id/][file-path]
cflash-id: cf1:, cf2 (only on 7210 SAS-T)