Table 39: Show Vwm-Shelf Output Fields - Alcatel-Lucent 7210 SAS M Configuration Manual

vwm-shelf
Syntax vwm-shelf vwm-shelf-id [detail]
Context show>system
Description
Lists all the shelves connected to the 7210 SAS node and display the administrative and operational
state of the connected shelves.
VWM-Shelf output — The following table describes the VWM-shelf output fields.

Table 39: Show VWM-shelf Output Fields

7210 SAS M, T, X, R6 Basic System Configuration Guide
Label
Shelf-ID
USB/l2C
Admin State
Oper State
Number of Equipped
slots
Slot-ID
Provisioned Type
Equipped Type
No of Slots
Part Number
CLEI code
Unit Mnemonic
Serial Number
Manufacturing
Date
Administrative
state
Configured shelf-ID for the 1830 VWM shelf connected to the 7210. It
must match the rotary dial setting on the 1830 device.
Type of connection used to connect to the 1830 VWM shelf.
The administrative state of the shelf. It is shown as UP if user has
enabled the shelf in the configuration.
Operational state of the shelf. It is set to up if the admin state is UP and
the 7210 node is able to communicate successfully with the shelf.
Number of line cards in use on the shelf.
Card identifier used to identify the card inserted into the slot #1 of the
1830 device.
User provisioned card-type to identify the module inserted into the
1830 device.
The card-type currently inserted into the slot on the 1830 device.
The number of slots available on the 1830 device.
The 1830 VWM CWDM device part number.
CLEI code of the 1830 device.
The Mnemonic string used to identify the card.
The 1830 device serial number.
The manufacturing date of the card.
The administrative state of the 1830 device. If the shelf or card is pro-
visioned and if no shutdown is executed, the this field displays UP, else
it displays 'Down'.
System Management
Description
Page 509