Bof Command Reference - Alcatel-Lucent 7210 SAS M Configuration Manual

BOF Command Reference

Command Hierarchies
Configuration Commands
NOTE: Not all the commands are supported on all the 7210 platforms. Please read
the CLI description to know which platforms support these commands.
bof
7210 SAS M, T, X, R6 Basic System Configuration Guide
— bof-password
— [no] console-disabled
— console-speed baud-rate
— no console-speed
— dns-domain dns-name
— no dns-domain
— [no] eth-mgmt-autoneg
— [no] eth-mgmt-autoneg
— [no] eth-mgmt-disabled
— eth-mgmt-duplex {full | half}
— [no] eth-mgmt-route ip-prefix/ip-prefix-length
— next-hop ip-address
— eth-mgmt-speed speed
— persist {on | off}
— ping-address ip-address
— no ping-address
— primary-config file-url
— no primary-config
— primary-dns ip-address
— no primary-dns
— primary-image file-url
— no primary-image
— save [cflash-id ]
— secondary-config file-url
— no secondary-config
— [no] secondary-dns ip-address
— secondary-image file-url
— no secondary-image
— tertiary-config file-url
— no tertiary-config
— tertiary-dns ip-address
— no tertiary-dns
— tertiary-image file-url
— no tertiary-image
— uplink-mode {access-uplink|network}
— wait seconds
— uplinkA-address ip-address/mask
— no uplinkA-address
— uplinkA-port port-id
— no uplinkA-port
ip-prefix/ip-prefix-length
Boot Option Files
Page 167