DICENTIS
5.4.2
Users
Click the Users button on the system settings page to open the user settings page:
This page is used to enter and modify user information and rights.
–
–
–
–
–
For each (new) user, the following can be entered or selected:
–
–
5.4.3
Audio
Click the Audio button to open the Audio settings page:
–
–
–
–
Bosch Security Systems B.V.
To add a user, click the + button to open the 'add new user' screen.
To change a user's name, select the user (the dark grey color means selected), and then
use the panel on the opposite side of the page to make changes.
To change a user's password, select the user, and then click the 'change password'
button.
To change a user's rights, select the user, and then click the required 'user rights' button.
To remove a user, select the user, and then click the recycle bin.
General: Enter First name, Last name, Username, Password (may be empty).
User rights: Select the required user rights for the user (grey means selected):
–
Manage meeting. This right gives access to the Manage discussion and Voting
pages, and volume control. Refer to Manage discussion, page 13 or Voting, page 16.
–
Prepare meeting. This right gives access to the Prepare discussion and Participants
pages. Refer to Prepare discussion, page 14.
–
Modify users. This right gives access to the Users page. Refer to Users, page 19.
–
Configure. This right gives access to the System settings page (excluding the Users
page, unless the user has the right Modify users), the System info, Logging, and
Battery & Signal pages, and volume control. Refer to System settings, page 17.
–
Prepare system. This right gives access to the Power and Battery & Signal pages.
Refer to Power, page 29.
System:
–
Master: Master volume control for the loudspeakers of the Wireless Devices, and the
line output of the Wireless Access Point.
Line input/output:
–
In: Sets the sensitivity of the audio line input of the Wireless Access Point.
–
Out: Sets the level of the audio line output of the Wireless Access Point.
Routing options: Defines the audio routing mode of the Wireless Access Point:
–
Recorder: Use this mode to connect an external recorder via the audio line output.
–
Floor: In this mode, the level of the audio line output is "also" controlled by the
Master.
–
Mix-minus: Use this mode to connect an external telephone coupler, or two systems,
via the audio line input and audio line output.
–
Insertion: Use this mode to connect external audio devices, such as audio mixers,
and audio processors.
–
PA (Public Address): In this mode, the level of the audio line output is "not"
controlled by the Master.
Digital Acoustic Feedback Suppression: Settings for the DAFS function:
–
Off: Sets the DAFS function to off.
–
Natural: Sets the DAFS function to on and selects the natural algorithm for speech.
Configuration manual
Web browser interface | en
2016.07 | V2.0 |
19