Licensing - Bosch dicentis Configuration Manual

DICENTIS
–
Notice!
Ensure that the Bosch Onvif Camera has firmware 5.80 or higher.
5.4.6

Licensing

Click the Licensing button to open the Licensing page.
Licensing is only required when you purchase software licenses.
The Licensing page provides you with an overview of the activated licenses.
Activate a license:
To activate software you need to have an activation ID which was send by email after
purchasing the software license. Activation requires a USB memory stick and any PC
connected to the internet.
Note: License activation is not supported for tablets.
1.
2.
3.
4.
5.
Returning a license
The return license process is started in the license website.
1.
2.
3.
4.
Bosch Security Systems B.V.
– Example:
Correct IP address: 192.168.10.111
Incorrect IP address: 192.168.010.111
Overview list: Here all connected cameras are listed. The overview list shows: the Camera
name, Serial number, software Version, camera Type and to which video switcher Input
the camera is connected to.
– The camera Serial number is used as a link to the camera configuration web pages.
Note: Only possible if your PC/laptop or tablet device is connected via the wired
Ethernet connection of the DCNM‑WAP.
– A trash can is displayed next to the Camera name for removing a selected camera.
Note: Only a disconnected camera can be removed.
Insert the USB memory stick into the PC connected to the Wireless Access Point
(DCNM‑WAP).
Click the Add license button.
Enter all required Customer information and Activation ID, click the Add license button
and then the Activate button. Note: You can add more than one Activation ID. When all
activation IDs are added, click the Activate button.
– A "save as" dialog is shown. Save the "request file" to your USB memory stick.
Go to the website https://licensing.boschsecurity.com using a PC/Laptop which is
connected to the internet, and login. If you do not have a username, contact your local
Bosch representative to acquire an account:
– Go to "manage license" and upload the "request file" from the USB memory stick.
– Save the "response file" to your USB memory stick.
In the DICENTIS web browser interface application, click the Process response message
button. Select the correct response file from the USB memory stick, and then click
"Open".
– Now the license is activated.
– New functionality is added and can be used by the system.
Log on to https://licensing.boschsecurity.com
Go to the overview, and find the customer that the license must be returned to.
Click on the link in the "location" column to open the "system details" pop-up.
Click the "return license" button.
Configuration manual
Web browser interface | en
2016.07 | V2.0 |
21