Webpage Setting; Ⅰ. Device Network Initial Setup Information; Ⅰ. 1 What You Need Before Network Connection; Ⅰ. 2 Connecting Device And Configuration - Inter-m PMU-240NA Operation Manual

Webpage Setting

Webpage Setting
. Device Network Initial Setup Information
DHCP
Netmask
DNS1
How to find PMU-NA's IP address: On the LCD display of PMU-NA, Touch Setup ⇒ STATUS, then, user can
find the IP address information below.
Ⅰ. 1 What you need before network connection.
- Notebook or PC connected to PMU-NA via its webpage.
- UTP CABLE
Ⅰ. 2 Connecting device and configuration
- Network Switch Hub
- Connect PMU-NA and PC in the same network.
PC
- Once you success the connection, turn on the device, then press LCD window > go to setup > STATUS. Check
the IP address information (IP, Subnet Mask, and DNS, etc) through the STATUS page.
- DHCP ENABLE: If there is 'NO' on the screen, find the same IP CLASS in the network. And, set the IP
information within the same network.
NO
255.255.255.0
168.126.63.1
네트워크
MIXINg AMPLIfIER
IP Address 192.168.1.99
gateway 192.168.1.1
DNS2 8.8.8.8
PMU-NA Series
PMU-240NA/600NA 1