Web Setting; Ccessing Pmu-N Series Web-Page; Network Setting - Inter-m PMU-360N Operation Manual

Web Setting

Web Setting

1. ccessing PMU-N Series Web-page

- If IP address has not been set, type the default IP address (192.168.1.99) – by pushing the factory set switch
more than 5 second, the unit will be reset as default mode.
When connected normally, user verification window will pop-up.
Type the created ID and P SSWORD to log in. (Default ID: admin, Password: 1)
※ Changing password: please refer to the section of '11. password setting'
※ Caution : It is better to set and use the assigned password for the security purpose.
Please make a note to keep the assigned password.

2. Network Setting

This is network setting page. The host name is used for each of identification when multiple unit is in auto
searching mode.
※IP address : Network information automatically set by DHCP (Dynamic IP address) or can be set as Static
IP address.
MIXING MPLIFIER
PMU-360N/480N/600N
13