Table of Contents
Advertisement
Ⅱ.5 EQ Setup
Above is the page that appears when clicking [EQ Setup] menu.
Total 7 types of PRESET (JAZZ, CLASSIC, ROCK, LIVE, USER1, USER2, USER3) are
①
stored, you can select any of the preset stored.
② Click Bypass ON/Off button to setup the Bypass ON/Off condition.
-
-
③ You can control 6-BAND EQ. (-10dB ~10dB)
6 BAND (125Hz, 400Hz, 1kHz, 3.1kHz, 8kHz, 12.5kHz)
④ BASS and TREBLE only show the setup value in device, change can be controlled only in the front side of
the device.
⑤ When clicking the [fLAT] button, the value of 6-BAND EQ sets up to 0dB.
The 6-BAND EQ value that was setup by the user, will be stored in [USER1], [USER2], [USER3].
⑥
(Among the PRESET list, when clicking [USER1], [USER2], [USER3], you can check the stored value.)
⑦ [EQ setup] page will show the help page.
1
2
5
7
: Present Bypass On condition (not using the EQ function)
: Present Bypass Off condition (using the EQ function)
MIXINg AMPLIfIER
4
3
6
PMU-240NA/600NA
13
Advertisement
Table of Contents
