Video Setup; Video Output - Lyngdorf Audio MP-50 Owner's Manual

Video Setup

The Video Setup menu allows you to register the video system settings for the MP-50's video
inputs and outputs, which in turn dictates which video formats can be shown on the screen when
these inputs and outputs are activated.
This section is for expert users only. As a rule of thumb, don´t make changes if
you are not familiar with the consequences.

Video Output

This menu manages the default and preferred setting for all video outputs.
Set the main video output of your device
Here you select which of the HDMI output connectors is your main output – other outputs can be
set to 'follow main'.
Preferred resolution
Per output you can specify what video resolution is best for your TV / projector. If 'None' is selected
the TV / projector will communicate with the source playing and ask for the maximum resolution
supported.
Default Video source
Here you set the output to be 'independent' of other outputs, 'follow main' or fixed at a given HDMI
input.
HDMI Audio out
Here you select 'Pass-through' to have standard audio output or not. Alternatively you can select
the output for connecting to the Zone B.
42