Audio Setup; Audio Processing; Voicing Setup; Zone B Setup - Lyngdorf Audio MP-50 Owner's Manual

Audio Setup

Audio Processing

This menu allows you to manage the audio processing presets for DTS, AURO and Dolby.
Dynamic Range Control functions in general with raising the level of quiet sounds and lowering the
level of the loud sounds. This is also known as Night Mode, but it works differently in the various
formats, why you can set it up for each format.
Dolby Center Spread is dedicated Dolby function to spread the center channel dialogue into the left
and right speakers to fit a very large screen.
Auro Strength sets the amount of generated signal in the postprocessing / upmix.
Auro Presets lets you select a channel configuration that best suits your speaker setup.

Voicing Setup

A voicing is an equalizer filter that can be activated to amplify or attenuate certain frequencies
according to your personal preferences. This equalization is an addition to the RoomPerfect™
corrections.
Voicings can be edited, deleted, added, or loaded in the MP-50.
Editing and adding voicings
In the web interface, you can edit or add a voicing by combining up to eight filter sections. For each
section, you can choose between parametric or high and low shelves as well as high and low-pass
filters. Once the filter type is selected, you can insert a center frequency, Q, and gain. Then the
filter, including the final voicing, is shown as a graph so that you can immediately see the result.
We recommend you create voicings using the web interface, but they can be created using the
remote control.

Zone B Setup

Here you can adjust the Zone B volume and default settings.
Zone B refers to an adjacent space, which is linked to the main setup. An example could be a bar
area outside the listening area, where you want to play the stereo sound track of cinema.
44