Please read all material carefully prior to installation. If you need additional assistance, contact
your Lyngdorf Audio representative or visit Lyngdorf.com.
Unpacking the Product
Carefully remove the unit and accessory kit from the carton and check for shipping damage.
Contact the shipper and your Lyngdorf Audio representative immediately if the unit bears any
sign of damage.
Note: Keep the shipping carton and all packing material for future use. If this
unit is shipped without the original packing, damage could occur and void the
Inventory
Check the list below to ensure that all necessary product components have been delivered.
Report all discrepancies to your Lyngdorf Audio representative immediately.
•
Owner's manual
•
Power cord
•
Remote
•
Microphone
•
Microphone stand
•
Microphone cable
•
Rack ears
Operating Voltage
Lyngdorf Audio products must be connected to the mains power system only. The MP-50 will
automatically detect voltage between 100-240v.
Ventilation Requirements
The MP-50 does not have a built-in fan, nor does it require special measures to ensure proper
heat dissipation. It should be placed according to these guidelines:
•
It should always have at least one inch / 25mm of free space on all sides.
•
It should be placed in an environment free of excessive heat.
•
In a rack system, the MP-50 should be placed at the bottom of the rack, still with at least
one inch / 25mm free space on all sides.
Pre-Installation
warranty.
5