Source Management - Lyngdorf Audio MP-50 Owner's Manual

Source Management

In the Source menu, you can register the individual sources connected to the MP-50 by the
audio and/or video input sockets they use.
Add Source
Source name
Input the name for the source.
Lipsync offset (ms)
Set delay time in milliseconds to ensure that the video and audio signals are played back
simultaneously.
Volume offset (dB)
Enables you to match input levels from different sources.
Audio input
Select the audio input connector.
If you want the audio input to match the video input from an HDMI source,
select HDMI Audio.
Default postprocessing
Select the default postprocessing mode.
Default voicing
Select the default voicing.
Video input
Select the video input connector.
Trigger out
Choose which trigger output to activate when using this source. (The interface for controlling
the triggers is found in the Trigger Setup under System Configuration)
Preset vTuner station
Select presets of the vTuner Internet radio station. (The interface for controlling the built-in
media streamer with vTuner is found in the bottom section of the HOME page)
11