Troubleshooting - Parkside PWSA 18 A1 Translation Of The Original Instructions

Troubleshooting

Turn off the appliance and, before doing any servicing, remove the battery.
Problems
Device doesn't start
Grinding tools do
not move although
the engine is run-
ning
Engine is slower
and stops
Grinding disc does
not rotate smoothly,
abnormal noises
can be heard
Possible Cause
On/off switch (
defective
Engine faulty
Grinding disc nut (
loose
Workpiece, remaining work-
pieces or remaining grinding
tools block drive
Device is overloaded through
workpiece
Grinding disc nut (
loose
Grinding disc is defective
Error correction
5) may be
Repair by Customer Care
Tighten grinding disc nut (
19) is
19) (see „Changing the grinding
disc")
Remove blockages
Reduce pressure on grinding tool
Workpiece unsuitable
Tighten grinding disc nut (
19 is
19 (see „Changing the grinding
disc")
Change grinding disc
GB
23