3.
Rotate the battery upward (3), and then remove the battery from the computer (4).
Reverse this procedure to install the battery.
Optical drive
Description
Optical drive (DVD±RW Double-Layer SuperMulti)
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the optical drive:
1.
Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer.
Battery on page
24).
Spare part number
809304-001
Component replacement procedures
HP Confidential
25