Speakers - HP Envy 17 Series Maintenance And Service Manual

Reverse this procedure to install the USB/audio board.

Speakers

Description
Speakers (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the system board (see
Remove the speakers:
1. Release the speaker cable from the clip built into the keyboard/top cover (1).
2. Remove the display cable (2) from the channel (3) at the top of the left speaker.
3. Remove the two Phillips screws (4)
4. Remove the speakers (5).
Battery on page 24).
Optical drive on page
Bottom cover on page
System board on page
25).
28).
40).
Component replacement procedures
HP Confidential
Spare part number
809316-001
47