Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures; Battery - HP Envy 17 Series Maintenance And Service Manual

(model numbers 17-s100 through 17-s199 and 17-s000 through 17-s099)
Table of Contents

Advertisement

HP Confidential
5
Removal and replacement procedures for
Customer Self-Repair parts
CAUTION:
by the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.

Component replacement procedures

NOTE:
Please read and follow the procedures described here to access and replace Customer Self-Repair
parts successfully.
NOTE:
Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer.
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
There are many screws that must be removed, replaced, or loosened when servicing Customer Self- Repair
parts. Make special note of each screw size and location during removal and replacement.

Battery

Description
4-cell, 41-WHr, 2.8-AHr, Li-ion battery
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
Remove the battery:
1.
Position the computer upside down on a flat surface.
2.
Slide the battery lock latch (1), and then slide the battery release latch (2) to release the battery.
24
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
The Customer Self-Repair program is not available in all locations. Installing a part not supported
Spare part number
800049-005

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents