Bottom Cover - HP Envy 17 Series Maintenance And Service Manual

HP Confidential

Bottom cover

Description
Bottom cover
Bottom cover hinge caps (includes left and right caps)
Rubber Kit (includes bottom cover screw covers)
Keyboard/top cover with backlight (includes backlight cable and keyboard cable)
For use in Canada
For use in the United States
Keyboard/top cover (includes keyboard cable)
For use in Canada
For use in the United States
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
Remove the bottom cover:
1. Position the computer upside down with the rear toward you.
2. Remove the four Phillips PM2.5×12.0 screws (1) that secure the hinge covers to the computer.
28 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 24).
Optical drive on page 25).
Spare part number
843589-001
809312-001
809314-001
835867-DB1
835867-001
835866-DB1
835866-001