Commercial Water
e-SV Characteristics
1SV, 3SV, 5SV, 10SV, 15SV, 22SV Series
304
R – ANSI flanges, delivery port above the suction port, with
N – ANSI flanges, in-line delivery and suction ports, AISI 316
P – Victaulic couplings, in-line delivery and suction ports, AISI
316
G – ANSI flange, in-line delivery and suction ports, Class
C – ISO clamp, AISI 316
33SV, 46SV, 66SV, 92SV, 125SV Series
ers and outer sleeve made entirely of stainless steel, and with
pump casing and motor adapter made of cast iron in the
standard version
125SV
ergy savings
higher head. This ensures reduced axial thrusts and enables the
use of standard NEMA TC motors that are easily found in the
market.
Optional Features
elastomers
PAGE 6
higher head. This ensures reduced axial thrusts and enables the
use of standard NEMA TC motors that are easily found in the
market.
of air in the critical area next to the mechanical seal
ISO 3069
face counter-flanges
dard supply for the T versions
disassembly
-
ing the motor from the pump
of air in the critical area next to the mechanical seal
-
both suction and delivery flanges
flanges, in compliance with ANSI raised face.
L enntech
Goulds Pumps
-
-