TP-Link AURANET EAP110-Outdoor Installation Manual page 6

SYS LED Explanation
LED Status
Flashes green, red
and yellow before
remaining green
Flashes green twice
Solid green
Flashes red
Flashes yellow
Double flashes red,
green, yellow
Passive PoE Adapter
Remote Reset:
Press and hold for 8 seconds
to reset the EAP to its factory
default settings.
Indication
The device is initializing.
Initialization is completed.
The device is working properly .
System errors. RAM, Flash, Ethernet, WLAN or
firmware may be malfunctioning.
Firmware update is in progress. Do not disconnect
or power off the device.
The device is being reset to its factory default
settings.
Power LED:
The Power LED indicates the
status of the electric current:
On: Supplying power.
Off: Not supplying power.
3