Connect Cables - TP-Link AURANET EAP110-Outdoor Installation Manual

Connect Cables

Step 1:
Firmly grasp the rear of the interface
cover and pull it downward.
Step 2:
Use an adequate Ethernet cable to
connect the LAN port. The length of
cable is up to 60m for steady power
supply. Shielded CAT5e (or above)
cable with an integrated ground wire
is recommended.
Step 3:
Affix the waterproof rubber insert to
the underside of the device for
waterproofing and replace the cover
until it firmly locks into place.
9