TP-Link AURANET EAP110-Outdoor Installation Manual page 10

Option 1: Pole Mounting
Step 1:
Loosen and completely remove the
end of the metal strap by turning the
captive screw counterclockwise
with a flathead screwdriver.
Step 2:
Lead the end of the metal strap
through the back of the EAP.
Step 3:
Position the EAP and wrap the metal
strap around the pole. Feed the end
back through the screw-block and
turn the screw clockwise to tighten
the metal strap using a flathead
screwdriver until the EAP is secure.
Step 4:
Connect the antennas to the EAP.
7