Add/Delete Rf Keyfob - Bosch Solution 3000 Quick Reference Manual

Control Panel
3.
Example:
To delete existing RF Repeater 8: Enter your installer code and press [0] [#] [8] [2] [9] [#] [*].
3.3

Add/Delete RF Keyfob

Add WE800EV2 Keyfob
Notice!
Learn all WE800EV2 keyfobs via WE800EV2 receiver Learn/Delete button before adding the
WE800EV2 keyfobs to the system. Refer WE800EV2 manual for learn/delete fobs.
Set RF receiver as WE800EV2 Receiver.
1.
2.
3.
4.
Delete WE800EV2 Keyfob
1.
2.
3.
Add RADION Keyfob
Set RF receiver as RADION Receiver.
1.
2.
3.
4.
Delete RADION Keyfob
1.
2.
3.
Example:
To delete existing RADION keyfob 1: Enter your installer code and press [0] [#] [3] [0] [1] [#]
[*].
Bosch Security Systems, Inc.
Press the [*] key to delete the RF Repeater.
Enter the Installer Code, followed by [0] and the [#] key (for example, [12340#]).
Enter the WE800EV2 keyfob number (301 to 332) you want to add (301 = keyfob 1, 302 =
keyfob2, etc.), followed by the [#] key. Up to 21 WE800EV2 keyfobs can be added, but
only current keyfob number (1 to 16 ) displays through zone indicators on the ICON
codepad.
Only use auto-learn mode to configure keyfob RFID. Press [*] key to switch into auto-
learn mode. When icon numbers (1 to 16) flash, press button 1 or 2 of the keyfob. The
panel learns the WE800EV2 Keyfob ID number and the last digit of RFID number displays
on the codepad. Press [#] key to confirm.
Enter [#] key to confirm the operation, or press [*] to cancel.
Enter the Installer Code, followed by [0] and the [#] key.
Enter the WE800EV2 keyfob number (301 to 332) you want to delete, followed by the [#]
key.
Press the [*] key to delete the WE800EV2 Keyfob.
Enter the Installer Code, followed by [0] and the [#] key (for example, [12340#]).
Enter the RADION keyfob number (301 to 332) you want to add (301 = keyfob 1, 302 =
keyfob2, etc.), followed by the [#] key. Up to 32 RADION keyfobs can be added, but only
current keyfob number (1 to 16 ) displays through zone indicators on the ICON codepad.
Use manual mode or auto-learn mode to configure RADION keyfob RFID.
– In manual mode, enter the 9-digit RF device ID number, followed by the [#] key.
– Or press [*] key to switch into auto-learn mode. When icon numbers (1 to 16) flash,
press button 1 or 2 of the keyfob. The panel learns the RADION Keyfob ID number
and the last digit of RFID number displays on the codepad. Press [#] key to confirm.
Enter [#] key to confirm the operation, or press [*] to cancel.
Enter the Installer Code, followed by [0] and the [#] key.
Enter the RADION keyfob number (301 to 332) you want to delete, followed by the [#]
key.
Press the [*] key to delete the RADION Keyfob.
Quick Reference Guide
Operating Commands | en
2015.06 | 03 | F.01U.298.027
15