Incorrect Date And Time; Drives Reported As "Dead" When Starting System - Fujitsu PRIMERGY TX200 S5 Operating Manual

Incorrect date and time

7.6 Incorrect date and time
Ê Set the date and time in the operating system or in the BIOS Setup under
the Main menu, using System Date and System Time respectively.
I
Note that the operating system may affect the system time. For example,
the operating system time may deviate from the system time under
Linux, and would overwrite the system time in the default setting on
shutdown.
If the date and time are still wrong after the server has been switched off and
back on again, replace the lithium battery (for a description refer to the Technical
Manual for the D2709 system board) or contact our customer service team.
7.7 Drives reported as "dead" when starting
system
RAID controller configuration incorrect
Ê Check and correct the settings for the drives using the RAID controller utility.
Further information is provided in the manual for the RAID controller.
82 Operating Manual
Troubleshooting and tips
TX200 S5