Hot-Plug Components; Hot-Plug Power Supply Units (Optional); Replacing The Hot-Plug Power Supply Unit - Fujitsu PRIMERGY TX200 S5 Operating Manual

Hot-plug components

8.1 Hot-plug components
This section describes how to handle hot-plug components and how to modify
your server hardware (e.g. adding/replacing hot-plug power supply units or hot-
plug HDD modules).
The hot-plug procedure increases the availability of system operation and
guarantees a high degree of data integrity and failsafe performance.
8.1.1

Hot-plug power supply units (optional)

With two hot-plug power supply units installed, if a defect occurs in one power
supply unit, the other power supply unit ensures unimpaired further operation.
The defective power supply unit can be replaced without interrupting operation.
8.1.1.1

Replacing the hot-plug power supply unit

Figure 18: Unlocking and removing the power supply unit
V
CAUTION!
When replacing a non-defective hot-plug power supply unit in a non-
redundant configuration (only one power supply unit), the server must
be switched off first.
86 Operating Manual
CSS components
TX200 S5